ADC1175CIMTC/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~75°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 60mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | ADC1175 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Power Supplies | 5V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 60mW |
| Number of Bits | 8 |
| Input Type | Single Ended |
| Architecture | Two-Step |
| Converter Type | ADC, RESISTANCE LADDER |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 1 B |
| Sampling Rate | 20 Msps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 20M |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 1.3 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 20 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 2.6V |
| Signal to Noise Ratio (SNR) | 47.6 dB |
| Analog Input Voltage-Min | -2V |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ADC1175CIMTC/NOPB Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 24-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 24 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, RESISTANCE LADDER converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -20°C~75°C.The number of samples of audio recorded every second is 20M Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Two-Step.There are 24 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC1175 family.This electronic digital converter is mounted in the way of Surface Mount.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 2.6V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 60mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 60mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 20 Msps.The minimal analog input voltage of this electrical AD converter is -2V.
ADC1175CIMTC/NOPB Features
1 Functions
24 basic kinds of terminations
24 pin count
Minimal supply voltage of 4.75V
5V power supplies
ADC1175CIMTC/NOPB Applications
There are a lot of Texas Instruments ADC1175CIMTC/NOPB ADC applications.
- In-building wireless telephony
- Rotary encoder
- Medical Imaging
- Data Acquisition Systems
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Digital signal processing
- Industrial Process Control
- Multicarrier, multimode digital receivers
- Displaying
- Scientific instruments
