ADC128D818CIMT/NOPB
| Parameters | |
|---|---|
| Interface | I2C, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 740μA |
| Power Dissipation | 2.01mW |
| Number of Bits | 12 |
| Input Type | Pseudo-Differential, Single Ended |
| Architecture | Sigma-Delta |
| Number of Inputs | 8 |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | I2C |
| Resolution | 1.5 B |
| Sampling Rate | 10 sps |
| Voltage - Supply, Analog | 3V~5.5V |
| Voltage - Supply, Digital | 3V~5.5V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 82 |
| Output Bit Code | BINARY |
| Power Consumption | 2mW |
| Linearity Error-Max (EL) | 0.0977% |
| Integral Nonlinearity (INL) | -2 LSB |
| Analog Input Voltage-Max | 5V |
| Differential Nonlinearity | 1 LSB |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Selectable Address, Temperature Sensor |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | ADC128D818 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Power Supplies | 3.3/5V |
| Configuration | MUX-ADC |
ADC128D818CIMT/NOPB Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 16-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 8 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 82 Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 3V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADC128D818 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single describes the type of supply.The supply/digital voltage of this electrical AD converter is 3V~5.5V.ADC converters can be mounted using Surface Mount.The ADC converter operates with the maximal supply voltage of 5.5V.8 inputs are employed.It operates with the minimal supply voltage of 3V.The maximal analog input voltage of this electrical AD converter is 5V.The ADC converter operates from 3.3/5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 2.01mW.Selectable Address, Temperature Sensor can be ensured when operating.The ADC converter consists of 1 elements.
ADC128D818CIMT/NOPB Features
1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 3V
3.3/5V power supplies
1 elements
ADC128D818CIMT/NOPB Applications
There are a lot of Texas Instruments ADC128D818CIMT/NOPB ADC applications.
- 3-phase power control
- High Speed Data Acquisition
- Rotary encoder
- Multicarrier, multimode digital receivers
- Industrial Process Control
- Cell Phones
- Micro and pico cell systems, software radios
- Handheld Terminal Interface
- Scientific instruments.
- Medical Imaging
