ADCMP551BRQ
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparator |
| Max Power Dissipation | 60mW |
| Technology | ECL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP551 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, Differential, LVPECL, Open-Emitter, PECL |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Operating Supply Current | 16mA |
| Nominal Supply Current | 16mA |
| Power Dissipation | 60mW |
| Output Current | 55mA |
| Max Supply Current | 17mA |
| Propagation Delay | 625 ps |
| Quiescent Current | 17mA |
| Turn On Delay Time | 750 ps |
| Common Mode Rejection Ratio | 76 dB |
| Voltage - Supply, Single/Dual (±) | 3.14V~5.25V |
| Input Offset Voltage (Vos) | 10mV |
| Voltage Gain | 60dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6V |
| Bias Current-Max (IIB) @25C | 5μA |
| Input Bias Current | 28μA |
| Voltage - Input Offset (Max) | 10mV @ 3.3V |
| Hysteresis | 500 μV |
| CMRR, PSRR (Typ) | 76dB CMRR, 75dB PSRR |
| Propagation Delay (Max) | 0.625ns |
| Height | 1.65mm |
| Length | 5mm |
| Width | 3.91mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADCMP551BRQ Overview
The product is packaged in 16-SSOP (0.154, 3.90mm Width) for ease of transportation.There is a Complementary, Differential, LVPECL, Open-Emitter, PECL output type for this comparator.This device is designed in Tube case.As you can see, the comparator has16 terminals.The component belongs to the Comparator family of electrical components.Supplied by 3.3V voltage, the comparator can accomplish the many demanding tasks.A comparator of this type is typically of type with Latch .There are a total of 2 elements in it.A total of 16 pins are included.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.16 pins are available on the comparator.You can search ADCMP551 if you are looking for more pin-to-pin solutions.In this comparator, the quiescent current is 17mA .Normal operation of the device requires 16mA supply current.An excess of current supply over 17mA could result in malfunction of the comparator.Based on the voltage formula, the voltage gain of the part is 60dB .For normal operation, the operating supply voltage must be 3.3V .
ADCMP551BRQ Features
Complementary, Differential, LVPECL, Open-Emitter, PECL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 17mA
Voltage Gain: 60dB
ADCMP551BRQ Applications
There are a lot of Analog Devices Inc. ADCMP551BRQ linear comparators applications.
- Wide Range VCO; MOS Clock Timers
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Mobile Phones and Tablets
- Infotainment & cluster
- DC/DC and AC/DC power supplies
- Point of load regulators
- Lithium ion battery monitoring
- General Purpose Low Voltage Applications
- Automatic Test Equipment
