Parameters |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
MSOP |
Number of Pins |
8 |
JESD-609 Code |
e0 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Comparators |
Technology |
ECL |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
OPEN-EMITTER |
Operating Supply Voltage |
3.3V |
Number of Elements |
1 |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
3.135V |
Nominal Supply Current |
42mA |
Power Dissipation |
75mW |
Response Time |
625 ps |
Amplifier Type |
COMPARATOR |
Common Mode Rejection Ratio |
76 dB |
Current - Input Bias |
5μA |
Input Offset Voltage (Vos) |
10mV |
Voltage Gain |
60dB |
Power Supply Rejection Ratio (PSRR) |
70dB |
Length |
3mm |
Width |
3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
ADCMP553BRM Overview
The product is packaged in MSOP in order to facilitate transportation.Output type of this comparator is OPEN-EMITTER .You can find 8 terminals of the comparator.The electrical component in this case belongs to the Comparators family.Supplied by 3.3V voltage, the comparator can accomplish the many demanding tasks.There are a total of 1 elements in it.The pinout of the component starts from 8 pins it has.Electronic comparator has 8 pins.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 42mA when using the device.According to the voltage formula, the part has a voltage gain of 60dB .In general, temperatures higher than 85°C are not recommended.A temperature lower than -40°C is unsuitable for the device.There is a maximum voltage supply on the comparator of 5.25V .This comparator can be supplied with a voltage as low as 3.135V .There is a high gain COMPARATOR amplifier at the heart of the comparator.Comparator electronics is necessary to have an operating supply voltage of 3.3V for normal operation.
ADCMP553BRM Features
OPEN-EMITTER output capability
Employing 1 elements
Voltage Gain: 60dB
COMPARATOR amplifier
ADCMP553BRM Applications
There are a lot of Analog Devices, Inc. ADCMP553BRM linear comparators applications.
- Security Detection Systems
- High-Speed Differential Line Receiver
- Limit Comparators
- Window Comparators
- Infotainment & cluster
- Multivibrators and High-Voltage Digital Logic Gates
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- Alarm and Monitoring Circuits
- Consumer Medical Electronics