ADCMP561BRQ
| Parameters | |
|---|---|
| Max Power Dissipation | 250mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP561 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, Differential, Open-Emitter, PECL |
| Number of Elements | 2 |
| Nominal Supply Current | 3.2mA |
| Power Dissipation | 160mW |
| Output Current | 30mA |
| Propagation Delay | 830 ps |
| Quiescent Current | 13mA |
| Response Time | 0.7 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | ±4.75V~5.25V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 63dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 3μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 5mA 28mA 13mA |
| Voltage - Input Offset (Max) | 2mV @ -5.2V5V |
| Current - Input Bias (Max) | 3μA @ -5.2V5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 85dB PSRR |
| Propagation Delay (Max) | 0.83ns |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparators |
ADCMP561BRQ Overview
The product is packaged in 16-SSOP (0.154, 3.90mm Width) to facilitate transportation.The comparator has an output type of Complementary, Differential, Open-Emitter, PECL .This chip is designed with the Tube package.There are 16 terminals on the comparator.The component belongs to the Comparators family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.It's a typical with Latch comparator.Electronic comparator consists of 2 elements in total.There are 16 pins on this board.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.This comparator has 16 pins.Search ADCMP561 to find more pin-to-pin solutions.There is a quiescent current of 13mA in this comparator.Electronic comparator is recommended that the nominal supply current be 3.2mA in order to use the device normally.The voltage formula shows that the part has a voltage gain of 63dB .
ADCMP561BRQ Features
Complementary, Differential, Open-Emitter, PECL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 13mA
Voltage Gain: 63dB
ADCMP561BRQ Applications
There are a lot of Analog Devices Inc. ADCMP561BRQ linear comparators applications.
- Handheld Instruments
- Battery-Powered Electronics
- Current and voltage sensing
- Factory automation & control
- Consumer Medical Electronics
- General-Purpose Portable Devices
- Infotainment and Clusters
- Mobile Phones and Tablets
- Wearable Devices
- Simple Analog-to-Digital Converters (ADCs)
