ADCMP562BRQ
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Comparator |
| Max Power Dissipation | 160mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ADCMP562 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, Differential, Open-Emitter, PECL |
| Number of Elements | 2 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 23mA |
| Power Dissipation | 160mW |
| Output Current | 30mA |
| Propagation Delay | 830 ps |
| Quiescent Current | 13mA |
| Response Time | 0.7 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | ±4.75V~5.25V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 3μA |
| Input Bias Current | 3μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 5mA 28mA 13mA |
| Voltage - Input Offset (Max) | 2mV @ -5.2V5V |
| Current - Input Bias (Max) | 3μA @ -5.2V5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 85dB PSRR |
| Propagation Delay (Max) | 0.83ns |
| Length | 8.6614mm |
| Width | 3.9116mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADCMP562BRQ Overview
In order to make transportation easier, it is packaged in 20-SSOP (0.154, 3.90mm Width) .The comparator has an output type of Complementary, Differential, Open-Emitter, PECL .This chip is designed with the Tube package.The comparator has 20 terminals.Other Comparator like the device play a important role in the industry.A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a with Latch chip.Electronic comparator has a total of 2 elements.There are 20 pins on this board.The recommended mounting type is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.20 pins are available on the comparator.Alternatively, you may search for ADCMP562 to find more pin-to-pin solutions for your specific needs.A quiescent current of 13mA is displayed by this comparator.Normal use of the device should require a nominal supply current of 23mA .Electronic comparator is possible to input up to 3μA current into the device.A voltage gain of 70dB can be determined from the voltage formula for the part.
ADCMP562BRQ Features
Complementary, Differential, Open-Emitter, PECL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 13mA
Voltage Gain: 70dB
ADCMP562BRQ Applications
There are a lot of Analog Devices Inc. ADCMP562BRQ linear comparators applications.
- Window Comparators
- Set Top Boxes
- Mobile Communications
- System control and monitoring
- Mobile Phones
- Current and voltage sensing
- Lithium ion battery monitoring
- Limit Comparators
- Battery-Powered Electronics
- Automotive
