ADCMP562BRQZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 250mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP562 |
| Pin Count | 20 |
| Output Type | Complementary, Differential, Open-Emitter, PECL |
| Number of Elements | 2 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 3.2mA |
| Power Dissipation | 160mW |
| Output Current | 30mA |
| Max Supply Current | 3.2mA |
| Propagation Delay | 830 ps |
| Quiescent Current | 13mA |
| Response Time | 0.83 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | ±4.75V~5.25V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 63dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 3μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 10μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 5mA 28mA 13mA |
| Voltage - Input Offset (Max) | 2mV @ -5.2V5V |
| Current - Input Bias (Max) | 3μA @ -5.2V5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 85dB PSRR |
| Propagation Delay (Max) | 0.83ns |
| Height | 1.65mm |
| Length | 8.66mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP562BRQZ Overview
The product is packaged in 20-SSOP (0.154, 3.90mm Width) to facilitate transportation.The comparator has an output type of Complementary, Differential, Open-Emitter, PECL .The part will be shipped by Tube .There are20 terminals on the comparator.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a with Latch chip.A total of 2 elements can be found in it.Electronic comparator has 20 pins.A Surface Mount mounting type is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.Electronic comparator has 20 pins.You can find more pin-to-pin solutions for your special requirements by searching ADCMP562 .The comparator displays a quiescent current of 13mA .Normally, the nominal supply current should be 3.2mA .If the current supply exceeds 3.2mA , the comparator might be damaged.There is a maximum current that can be input into the device of 3μA .According to the voltage formula, the part has a voltage gain of 63dB .
ADCMP562BRQZ Features
Complementary, Differential, Open-Emitter, PECL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 13mA
Voltage Gain: 63dB
ADCMP562BRQZ Applications
There are a lot of Analog Devices Inc. ADCMP562BRQZ linear comparators applications.
- DC/DC and AC/DC power supplies
- Consumer Medical Electronics
- General-Purpose Portable Devices
- Analog front end
- Notebooks and PDAs
- General Purpose Low Voltage Applications
- Simple Analog-to-Digital Converters (ADCs)
- Laptop Computers
- Industrial
- Automatic Test Equipment
