ADCMP562BRQZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | MATTE TIN |
| Subcategory | Comparator |
| Max Power Dissipation | 160mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP562 |
| Pin Count | 20 |
| Output Type | Complementary, PECL |
| Number of Elements | 2 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 23mA |
| Power Dissipation | 160mW |
| Output Current | 30mA |
| Propagation Delay | 830 ps |
| Quiescent Current | 13mA |
| Turn On Delay Time | 750 ps |
| Response Time | 0.83 ns |
| Common Mode Rejection Ratio | 85 dB |
| Voltage - Supply, Single/Dual (±) | ±4.75V~5.25V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 63dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 3μA |
| Input Bias Current | 3μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 5mA 28mA 13mA |
| Voltage - Input Offset (Max) | 2mV @ -5.2V 5V |
| Current - Input Bias (Max) | 3μA @ -5.2V5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 85dB PSRR |
| Propagation Delay (Max) | 0.83ns |
| Height Seated (Max) | 1.75mm |
| Length | 8.66mm |
| Width | 3.91mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP562BRQZ-RL7 Overview
In order to make transportation easier, it is packaged in 20-SSOP (0.154, 3.90mm Width) .Output type of this comparator is Complementary, PECL .The part is shipped by Tape & Reel (TR) .The comparator has 20 terminals.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Currently, it consists of only 2 elements.The pinout of the component starts from 20 pins it has.In general, mounting type Surface Mount is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.This comparator has 20 pins.You can find more pin-to-pin solutions by searching ADCMP562 .There is 13mA current flowing in this comparator.Electronic comparator is recommended that the nominal supply current for the device be set to 23mA .Electronic comparator is possible to input a maximum of 3μA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 63dB .
ADCMP562BRQZ-RL7 Features
Complementary, PECL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 13mA
Voltage Gain: 63dB
ADCMP562BRQZ-RL7 Applications
There are a lot of Analog Devices Inc. ADCMP562BRQZ-RL7 linear comparators applications.
- Appliances
- Handheld Instruments
- Multivibrators and High-Voltage Digital Logic Gates
- Consumer Medical Electronics
- Factory automation & control
- DC/DC and AC/DC power supplies
- Set Top Boxes
- Pulse, Squarewave, and Time Delay Generators
- Simple Analog-to-Digital Converters (ADCs)
- Analog front end
