ADCMP563BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 120mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADCMP563 |
| Pin Count | 16 |
| Output Type | Complementary, Differential, ECL, Open-Emitter |
| Number of Elements | 2 |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 23mA |
| Power Dissipation | 120mW |
| Propagation Delay | 750 ps |
| Response Time | 500 ps |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | ±4.75V~5.25V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 3μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 5mA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Current - Input Bias (Max) | 10μA @ 5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 85dB PSRR |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP563BCPZ-RL7 Overview
The product is packaged in 16-WFQFN Exposed Pad, CSP to facilitate transportation.Output type Complementary, Differential, ECL, Open-Emitter is used for this comparator.The part is shipped by Tape & Reel (TR) .The comparator has a total of 16 terminals.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a with Latch chip.This element consists of 2 elements in total.The device includes 16 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 16 pins on the comparator.You may wish to search ADCMP563 for more solutions that address your specific needs.For normal use of the device, the nominal supply current should be 23mA .The voltage formula shows that the part has a voltage gain of 70dB .
ADCMP563BCPZ-RL7 Features
Complementary, Differential, ECL, Open-Emitter output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Voltage Gain: 70dB
ADCMP563BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADCMP563BCPZ-RL7 linear comparators applications.
- Battery management and protection
- Motor drives
- Ultra-Low Power Systems
- Wireless Base Stations
- Industrial
- Body Control Modules
- Portable and Battery-Powered Systems
- Metering Systems
- Power Supervision
- Notebooks and PDAs
