banner_page

ADCMP564BRQ

Surface Mount Tube 30mA mA 0.83 ns μs Linear Comparators 63dB dB 3μA pA 23mA μA 3mV mV


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADCMP564BRQ
  • Package: 20-SSOP (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 172
  • Description: Surface Mount Tube 30mA mA 0.83 ns μs Linear Comparators 63dB dB 3μA pA 23mA μA 3mV mV (Kg)

Details

Tags

Parameters
Contact Plating Lead, Tin
Mounting Type Surface Mount
Package / Case 20-SSOP (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Type with Latch
Terminal Finish Tin/Lead (Sn85Pb15)
Subcategory Comparator
Max Power Dissipation 120mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number ADCMP564
Pin Count 20
Qualification Status Not Qualified
Output Type Complementary, Differential, ECL, Open-Emitter
Number of Elements 2
Operating Supply Current 23mA
Nominal Supply Current 23mA
Power Dissipation 120mW
Output Current 30mA
Propagation Delay 830 ps
Quiescent Current 25mA
Turn On Delay Time 750 ps
Response Time 0.83 ns
Common Mode Rejection Ratio 80 dB
Voltage - Supply, Single/Dual (±) ±4.75V~5.25V
Input Offset Voltage (Vos) 3mV
Neg Supply Voltage-Nom (Vsup) -5.2V
Voltage Gain 63dB
Average Bias Current-Max (IIB) 10μA
Power Supply Rejection Ratio (PSRR) 85dB
Supply Voltage Limit-Max 6V
Input Bias Current 3μA
Neg Supply Voltage-Max (Vsup) -6V
Current - Quiescent (Max) 5mA 25mA
Voltage - Input Offset (Max) 2mV @ -5.2V5V
Current - Input Bias (Max) 3μA @ -5.2V5V
Hysteresis ±1mV
CMRR, PSRR (Typ) 80dB CMRR, 85dB PSRR
Propagation Delay (Max) 0.83ns
Length 8.6614mm
Width 3.9116mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

ADCMP564BRQ Overview


The product is packaged in 20-SSOP (0.154, 3.90mm Width) in order to facilitate transportation.Output type Complementary, Differential, ECL, Open-Emitter is used for this comparator.The chip is packaged with Tube .There are20 terminals on the comparator.The electrical component here belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a with Latch chip.Electronic comparator consists of 2 elements in total.The device is equipped with 20 pins.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.There are 20 pins on the comparator.You may wish to search ADCMP564 for more solutions that address your specific needs.There is a quiescent current of 25mA in this comparator.Normal use of the device should require a nominal supply current of 23mA .From the voltage formula, the voltage gain of the part is 63dB .

ADCMP564BRQ Features


Complementary, Differential, ECL, Open-Emitter output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 25mA
Voltage Gain: 63dB

ADCMP564BRQ Applications


There are a lot of Analog Devices Inc. ADCMP564BRQ linear comparators applications.

  • Building automation
  • Battery-Powered Electronics
  • Automotive
  • Current and voltage sensing
  • General Purpose Low Voltage Applications
  • Wide Range VCO; MOS Clock Timers
  • Window Comparators
  • Industrial
  • Window Comparators
  • Portable Battery Monitoring

Write a review

Note: HTML is not translated!
    Bad           Good