ADCMP565BPZ
| Parameters | |
|---|---|
| Length | 9.04mm |
| Width | 9.04mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 550mW |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP565 |
| Pin Count | 20 |
| Output Type | Complementary, Differential, ECL, Open-Emitter |
| Number of Elements | 2 |
| Nominal Supply Current | 18mA |
| Power Dissipation | 550mW |
| Output Current | 30mA |
| Propagation Delay | 375 ps |
| Quiescent Current | 80mA |
| Response Time | 0.375 ns |
| Common Mode Rejection Ratio | 69 dB |
| Voltage - Supply, Single/Dual (±) | ±4.75V~5.25V |
| Input Offset Voltage (Vos) | 6mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 69dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 40μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 40μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Current - Quiescent (Max) | 18mA 80mA |
| Voltage - Input Offset (Max) | 6mV @ 5V |
| Current - Input Bias (Max) | 40μA @ 5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 69dB CMRR |
| Propagation Delay (Max) | 0.375ns |
| Height | 3.68mm |
ADCMP565BPZ Overview
Electronic comparator is packaged in 20-LCC (J-Lead) for convenient transportation.The comparator has a type Complementary, Differential, ECL, Open-Emitter output.This chip is designed with the Tube package.The device is designed with 20 terminations.The chip belongs to Comparator .In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as with Latch .A total of 2 elements can be found in it.A total of 20 pins are included.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 20 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching ADCMP565 .The comparator presents a quiescent current of 80mA volts.The nominal supply current of the device should be 18mA for normal use.A maximum current of 40μA can be supplied to the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 60dB .
ADCMP565BPZ Features
Complementary, Differential, ECL, Open-Emitter output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 80mA
Voltage Gain: 60dB
ADCMP565BPZ Applications
There are a lot of Analog Devices Inc. ADCMP565BPZ linear comparators applications.
- Wearable Devices
- Ultra-Low Power Systems
- Simple Analog-to-Digital Converters (ADCs)
- Notebooks and PDAs
- Alarm and Monitoring Circuits
- Analog front end
- Current and voltage sensing
- Portable Battery Monitoring
- Set Top Boxes
- Automotive
