ADCMP572BCPZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 230mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP572 |
| Pin Count | 16 |
| Output Type | CML, Complementary |
| Operating Supply Voltage | 5.2V |
| Number of Elements | 1 |
| Power Supplies | 3.3/5V |
| Operating Supply Current | 44mA |
| Nominal Supply Current | 44mA |
| Power Dissipation | 145mW |
| Output Current | 20mA |
| Max Supply Current | 52mA |
| Propagation Delay | 165 ps |
| Quiescent Current | 52mA |
| Response Time | 0.165 ns |
| Common Mode Rejection Ratio | 65 dB |
| Voltage - Supply, Single/Dual (±) | 3.1V~5.4V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 54dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 25μA |
| Input Bias Current | 25μA |
| Voltage - Input Offset (Max) | 2mV @ 3.3V |
| Current - Input Bias (Max) | 25μA @ 3.3V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 65dB CMRR, 74dB PSRR |
| Propagation Delay (Max) | 0.165ns |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP572BCPZ-R2 Overview
The product is packaged in 16-VFQFN Exposed Pad, CSP to facilitate transportation.This comparator is of the CML, Complementary output type.The chip is packaged with Tape & Reel (TR) .As you can see, the comparator has16 terminals.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 3.3V voltage.In terms of type, this is a typical with Latch comparator.The total number of elements is 1 .The device contains 16 pins.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 16 pins.You can find more pin-to-pin solutions by searching ADCMP572 .There is a quiescent current of 52mA in this comparator.Normally, the nominal supply current should be 44mA .Current supply exceeding 52mA could cause disfunction of the compartator.The device can be operated with 3.3/5V power supplies.Input current to the device is limited to 25μA .From the voltage formula, the voltage gain of the part is 54dB .The normal operation of the system requires 5.2V operating voltage.
ADCMP572BCPZ-R2 Features
CML, Complementary output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 52mA
Voltage Gain: 54dB
ADCMP572BCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP572BCPZ-R2 linear comparators applications.
- Security Detection Systems
- Current and voltage sensing
- High-Speed Sampling Circuits
- Battery-Powered Electronics
- Industrial
- Mobile Phones and Tablets
- Wide Range VCO; MOS Clock Timers
- Battery management and protection
- Set Top Boxes
- Lithium ion battery monitoring
