ADCMP572BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 145mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP572 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | CML, Complementary |
| Number of Elements | 1 |
| Power Supplies | 3.3/5V |
| Operating Supply Current | 44mA |
| Nominal Supply Current | 44mA |
| Power Dissipation | 145mW |
| Output Current | 20mA |
| Propagation Delay | 165 ps |
| Quiescent Current | 52mA |
| Turn On Delay Time | 150 ps |
| Response Time | 0.165 ns |
| Common Mode Rejection Ratio | 65 dB |
| Voltage - Supply, Single/Dual (±) | 3.1V~5.4V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 25μA |
| Input Bias Current | 25μA |
| Voltage - Input Offset (Max) | 2mV @ 3.3V |
| Current - Input Bias (Max) | 25μA @ 3.3V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 65dB CMRR, 74dB PSRR |
| Propagation Delay (Max) | 0.165ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP572BCPZ-RL7 Overview
In order to make transportation easier, it is packaged in 16-VFQFN Exposed Pad, CSP .A comparator with a CML, Complementary output is used here.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 16 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 3.3V voltage.The type of the chip can be classified as with Latch .There are a total of 1 elements in it.The device is equipped with 16 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has a pin count of 16 .You can find more pin-to-pin solutions for your special requirements by searching ADCMP572 .A quiescent current of 52mA is displayed by this comparator.Normally, the nominal supply current should be 44mA when using the device.The device can be powered by 3.3/5V power supplies.You are allowed to input a maximum current of 25μA into the device.Comparator electronics follows that the voltage gain of the part is 70dB .
ADCMP572BCPZ-RL7 Features
CML, Complementary output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 52mA
Voltage Gain: 70dB
ADCMP572BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADCMP572BCPZ-RL7 linear comparators applications.
- Mobile Phones and Tablets
- Portable Battery Monitoring
- System control and monitoring
- Consumer Medical Electronics
- Alarm and Monitoring Circuits
- DC/DC and AC/DC power supplies
- Ultra-Low Power Systems
- Current and voltage sensing
- Window Comparators, Multivibrators
- Lithium ion battery monitoring
