ADCMP572BCPZ-WP
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP572 |
| Pin Count | 16 |
| Output Type | CML, Complementary |
| Number of Elements | 1 |
| Power Supplies | 3.3/5V |
| Operating Supply Current | 44mA |
| Nominal Supply Current | 44mA |
| Power Dissipation | 145mW |
| Output Current | 20mA |
| Max Supply Current | 44mA |
| Propagation Delay | 165 ps |
| Quiescent Current | 52mA |
| Response Time | 0.165 ns |
| Common Mode Rejection Ratio | 65 dB |
| Voltage - Supply, Single/Dual (±) | 3.1V~5.4V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 54dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 25μA |
| Input Bias Current | 25μA |
| Voltage - Input Offset (Max) | 2mV @ 3.3V |
| Current - Input Bias (Max) | 25μA @ 3.3V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 65dB CMRR, 74dB PSRR |
| Propagation Delay (Max) | 0.165ns |
| Height | 750μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 230mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
ADCMP572BCPZ-WP Overview
For convenience, it is packaged in 16-VFQFN Exposed Pad, CSP .This comparator is of the CML, Complementary output type.This device is designed in Tray case.You can find 16 terminals of the comparator.Electronic comparator is a part of Comparator family.In the presence of a 3.3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as with Latch .This is a 1 element comparator.The device includes 16 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.16 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search ADCMP572 .The comparator presents a quiescent current of 52mA volts.Normally, the nominal supply current should be 44mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 44mA .The device can be run with 3.3/5V power supplies.You are allowed to input a maximum current of 25μA into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 54dB .
ADCMP572BCPZ-WP Features
CML, Complementary output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 52mA
Voltage Gain: 54dB
ADCMP572BCPZ-WP Applications
There are a lot of Analog Devices Inc. ADCMP572BCPZ-WP linear comparators applications.
- Power Supervision
- Zero-Crossing Detectors
- System control and monitoring
- Wide Range VCO; MOS Clock Timers
- Current and voltage sensing
- Wearable Devices
- Pulse, Squarewave, and Time Delay Generators
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Alarm and Monitoring Circuits
