ADCMP573BCP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) - with Silver (Ag) barrier |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | S-XQCC-N16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.4V |
| Min Supply Voltage | 3.1V |
| Power Dissipation-Max | 230mW |
| Supply Current-Max | 76mA |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 65 dB |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 50μA |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Bias Current-Max (IIB) @25C | 25μA |
| Input Offset Voltage-Max | 5000μV |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
ADCMP573BCP Overview
The chip is packaged with Bulk .The comparator has 16 terminals.Electronic comparator is a part of Comparator family.With a voltage of 3.3V supplied, the comparator is capable of performing a wide range of demanding tasks.As a result, it contains 16 pins.There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is sufficient to run the device wElectronic comparatorh 3.3V power supplies.From the voltage formula, the voltage gain of the part is 70dB .Comparator electronics is not recommended to operate at a temperature higher than 85°C .A temperature lower than -40°C is unsuitable for the device.The comparator has a maximum supply voltage of 5.4V .A minimum supply voltage of 3.1V is allowed for this comparator.With a minimum current of 76mA , this part can be supplied.A comparator consists of a high-gain COMPARATOR amplifier.
ADCMP573BCP Features
Voltage Gain: 70dB
COMPARATOR amplifier
ADCMP573BCP Applications
There are a lot of Analog Devices, Inc. ADCMP573BCP linear comparators applications.
- Zero-Crossing Detectors
- Industrial
- DC/DC and AC/DC power supplies
- Building automation
- Wide Range VCO; MOS Clock Timers
- Hand-Held Electronics
- Analog front end
- General Purpose Low Voltage Applications
- Handheld Instruments
- Battery-Powered Electronics
