ADCMP573BCPZ-R2
| Parameters | |
|---|---|
| Output Current | 35mA |
| Propagation Delay | 165 ps |
| Quiescent Current | 80mA |
| Turn On Delay Time | 150 ps |
| Response Time | 0.165 ns |
| Common Mode Rejection Ratio | 65 dB |
| Voltage - Supply, Single/Dual (±) | 3.1V~5.4V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 54dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 25μA |
| Input Bias Current | 25μA |
| Voltage - Input Offset (Max) | 2mV @ 3.3V |
| Current - Input Bias (Max) | 25μA @ 3.3V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 65dB CMRR, 74dB PSRR |
| Propagation Delay (Max) | 0.165ns |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 230mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP573 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, PECL |
| Operating Supply Voltage | 5.2V |
| Number of Elements | 1 |
| Power Supplies | 3.3/5V |
| Operating Supply Current | 66mA |
| Nominal Supply Current | 80mA |
| Power Dissipation | 145mW |
ADCMP573BCPZ-R2 Overview
The product is packaged in 16-VFQFN Exposed Pad, CSP in order to facilitate transportation.There is a comparator of type Complementary, PECL output on this device.This package has been designed with Tape & Reel (TR) .The comparator has 16 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 3.3V voltage.When it comes to types, this comparator is a typical with Latch .In total, it contains 1 elements.The board includes 16 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.There are 16 pins on the comparator.Try search ADCMP573 to get more pin-to-pin solutions for your special needs.This comparator presents a quiescent current of 80mA .Normally, the nominal supply current should be 80mA .There is sufficient power to run the device from 3.3/5V power supplies.Electronic comparator is possible to input a maximum current of 25μA into the device.According to the voltage formula, the part has a voltage gain of 54dB .For normal operation, the operating supply voltage must be 5.2V .
ADCMP573BCPZ-R2 Features
Complementary, PECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 80mA
Voltage Gain: 54dB
ADCMP573BCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP573BCPZ-R2 linear comparators applications.
- High-Speed Differential Line Receiver
- Simple Analog-to-Digital Converters (ADCs)
- Motor drives
- Analog front end
- Mobile Communications
- Notebooks and PDAs
- Limit Comparators
- General-Purpose, Low-Voltage Applications
- Threshold Detectors
- Zero-Crossing Detectors
