ADCMP573BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 145mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP573 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, PECL |
| Number of Elements | 1 |
| Power Supplies | 3.3/5V |
| Operating Supply Current | 66mA |
| Nominal Supply Current | 66mA |
| Power Dissipation | 145mW |
| Output Current | 35mA |
| Propagation Delay | 165 ps |
| Quiescent Current | 80mA |
| Response Time | 0.165 ns |
| Common Mode Rejection Ratio | 65 dB |
| Voltage - Supply, Single/Dual (±) | 3.1V~5.4V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 54dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 25μA |
| Input Bias Current | 25μA |
| Voltage - Input Offset (Max) | 2mV @ 3.3V |
| Current - Input Bias (Max) | 25μA @ 3.3V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 65dB CMRR, 74dB PSRR |
| Propagation Delay (Max) | 0.165ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP573BCPZ-RL7 Overview
A convenient packaging is provided in the form of 16-VFQFN Exposed Pad, CSP .The comparator has a Complementary, PECL output.The part will be shipped by Tape & Reel (TR) .There are 16 terminals on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 3.3V voltage, the comparator can accomplish the many demanding tasks.When it comes to types, this comparator is a typical with Latch .The total number of elements is 1 .Electronic comparator has 16 pins.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .Electronic comparator has 16 pins.You may wish to search ADCMP573 for more solutions that address your specific needs.A quiescent current of 80mA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 66mA supply current.A power supply of 3.3/5V is sufficient for the operation of the device.Electronic comparator is possible to input up to 25μA current into the device.A voltage gain of 54dB can be determined from the voltage formula for the part.
ADCMP573BCPZ-RL7 Features
Complementary, PECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 80mA
Voltage Gain: 54dB
ADCMP573BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADCMP573BCPZ-RL7 linear comparators applications.
- Limit Comparators
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Automatic Test Equipment
- Current and voltage sensing
- Mobile Phones
- Multivibrators and High-Voltage Digital Logic Gates
- Portable and Battery-Powered Systems
- RC Timers
- Portable Battery Monitoring
