ADCMP573BCPZ-WP
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 65 dB |
| Voltage - Supply, Single/Dual (±) | 3.1V~5.4V |
| Input Offset Voltage (Vos) | 2mV |
| Voltage Gain | 54dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 25μA |
| Input Bias Current | 25μA |
| Voltage - Input Offset (Max) | 2mV @ 3.3V |
| Current - Input Bias (Max) | 25μA @ 3.3V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 65dB CMRR, 74dB PSRR |
| Propagation Delay (Max) | 0.165ns |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 145mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADCMP573 |
| Pin Count | 16 |
| Output Type | Complementary, PECL |
| Number of Elements | 1 |
| Power Supplies | 3.3/5V |
| Operating Supply Current | 66mA |
| Nominal Supply Current | 64mA |
| Power Dissipation | 145mW |
| Output Current | 35mA |
| Max Supply Current | 64mA |
| Propagation Delay | 165 ps |
| Quiescent Current | 80mA |
| Response Time | 0.165 ns |
ADCMP573BCPZ-WP Overview
Electronic comparator is packaged in 16-VFQFN Exposed Pad, CSP for convenient transportation.Output type of this comparator is Complementary, PECL .The part will be shipped by Tray .The device is designed with 16 terminations.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 3.3V voltage.In general, the chip type can be classified as with Latch .A total of 1 elements can be found in it.There are 16 pins on this board.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.There are 16 pins on the comparator.If you require more pin-to-pin solutions, search ADCMP573 for more options.In this comparator, the quiescent current is 80mA .Normal operation of the device requires 64mA supply current.Current supply exceeding 64mA could cause disfunction of the compartator.Electronic comparator is sufficient to run the device wElectronic comparatorh 3.3/5V power supplies.You can input a maximum current of 25μA into this device.According to the voltage formula, the part has a voltage gain of 54dB .
ADCMP573BCPZ-WP Features
Complementary, PECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 80mA
Voltage Gain: 54dB
ADCMP573BCPZ-WP Applications
There are a lot of Analog Devices Inc. ADCMP573BCPZ-WP linear comparators applications.
- Wearable Devices
- Mobile Communications
- Building automation
- Self-diagnostics
- Window Comparators
- System control and monitoring
- Mobile Phones
- Motor drives
- Power management
- Limit Comparators
