ADCMP580BCPZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 240mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP580 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | CML, Complementary |
| Number of Elements | 1 |
| Power Supplies | +-53.3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 240mW |
| Output Current | 44mA |
| Propagation Delay | 180 ps |
| Quiescent Current | 8mA |
| Turn On Delay Time | 150 ps |
| Response Time | 0.18 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±4.5V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 48dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 30μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 30μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 10mV @ ±5V |
| Current - Input Bias (Max) | 30μA @ ±5V |
| Hysteresis | 1mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 44mA @ 5V |
| Propagation Delay (Max) | 0.18ns |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP580BCPZ-R2 Overview
The product is packaged in 16-VFQFN Exposed Pad, CSP in order to facilitate transportation.There is a CML, Complementary output type for this comparator.The part is shipped by Tape & Reel (TR) .As you can see, the comparator has16 terminals.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.In general, the chip type can be classified as with Latch .There are a total of 1 elements in it.The device is equipped with 16 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.There are 16 pins on the comparator.Alternatively, you may search for ADCMP580 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 8mA in this comparator.Normal use of the device should require a nominal supply current of 50mA .This device requires +-53.3V power supplies to operate.Electronic comparator is possible to input up to 30μA current into the device.The voltage gain of the part is indicated by 48dB in the voltage formula.
ADCMP580BCPZ-R2 Features
CML, Complementary output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 8mA
Voltage Gain: 48dB
ADCMP580BCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP580BCPZ-R2 linear comparators applications.
- Handheld Instruments
- Mobile Communications
- Power management
- Factory automation & control
- Alarm and Monitoring Circuits
- Portable and Battery-Powered Systems
- Industrial
- Wireless Base Stations
- Battery-Powered Electronics
- Window Comparators
