ADCMP580BCPZ-WP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 260mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP580 |
| Pin Count | 16 |
| Output Type | CML, Complementary |
| Number of Elements | 1 |
| Power Supplies | +-53.3V |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 240mW |
| Output Current | 44mA |
| Max Supply Current | 8mA |
| Propagation Delay | 180 ps |
| Quiescent Current | 8mA |
| Response Time | 0.18 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±4.5V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 48dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 30μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 30μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 10mV @ ±5V |
| Current - Input Bias (Max) | 30μA @ ±5V |
| Hysteresis | 1mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 44mA @ 5V |
| Propagation Delay (Max) | 0.18ns |
| Height | 830μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP580BCPZ-WP Overview
In order to facilitate transportation, it is packaged in 16-VFQFN Exposed Pad, CSP .There is a comparator of type CML, Complementary output on this device.The chip is packaged with Tray .16 terminals are found on the comparator.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical with Latch comparator.Electronic comparator consists of 1 elements in total.The board includes 16 pins.The recommended mounting method is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~125°C .This comparator has 16 pins.If you require more pin-to-pin solutions, search ADCMP580 for more options.This comparator presents a quiescent current of 8mA .Electronic comparator is recommended that the nominal supply current for the device be set to 8mA .An excess of current supply over 8mA could result in malfunction of the comparator.The device can be run with +-53.3V power supplies.A maximum current of 30μA can be supplied to the device.Based on the voltage formula, the voltage gain of the part is 48dB .
ADCMP580BCPZ-WP Features
CML, Complementary output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 8mA
Voltage Gain: 48dB
ADCMP580BCPZ-WP Applications
There are a lot of Analog Devices Inc. ADCMP580BCPZ-WP linear comparators applications.
- Battery management and protection
- Battery-Powered Electronics
- Wearable Devices
- General Purpose Low Voltage Applications
- Motor drives
- Zero-Crossing Detectors
- RC Timers
- High-Speed Differential Line Receiver
- Hand-Held Electronics
- Analog front end
