Parameters |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-WFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
with Latch |
Subcategory |
Comparator |
Max Power Dissipation |
240mW |
Technology |
BIPOLAR |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADCMP581 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Output Type |
Complementary, ECL |
Number of Elements |
1 |
Power Supplies |
+-53.3V |
Nominal Supply Current |
34mA |
Power Dissipation |
240mW |
Output Current |
44mA |
Propagation Delay |
180 ps |
Quiescent Current |
8mA |
Turn On Delay Time |
150 ps |
Response Time |
0.18 ns |
Common Mode Rejection Ratio |
60 dB |
Voltage - Supply, Single/Dual (±) |
±4.5V~5.5V |
Input Offset Voltage (Vos) |
10mV |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Voltage Gain |
70dB |
Power Supply Rejection Ratio (PSRR) |
75dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
30μA |
Dual Supply Voltage |
5V |
Input Bias Current |
30μA |
Neg Supply Voltage-Max (Vsup) |
-6V |
Voltage - Input Offset (Max) |
10mV @ ±5V |
Current - Input Bias (Max) |
30μA @ ±5V |
Hysteresis |
1mV |
CMRR, PSRR (Typ) |
60dB CMRR, 75dB PSRR |
Current - Output (Typ) |
44mA @ 5V |
Propagation Delay (Max) |
0.18ns |
Height Seated (Max) |
0.9mm |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADCMP581BCPZ-R2 Overview
To facilitate transportation, it comes packaged in 16-WFQFN Exposed Pad, CSP .There is a comparator of type Complementary, ECL output on this device.Electronic comparator is shipped by Tape & Reel (TR) .There are 16 terminals on the comparator.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as with Latch .Electronic comparator consists of 1 elements in total.The device is equipped with 16 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator is equipped with 16 pins.You can search ADCMP581 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 8mA .The nominal supply current of the device should be 34mA for normal use.The device can be powered by +-53.3V power supplies.You can input a maximum current of 30μA into this device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 70dB .
ADCMP581BCPZ-R2 Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 8mA
Voltage Gain: 70dB
ADCMP581BCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP581BCPZ-R2 linear comparators applications.
- Security Detection Systems
- Alarm and Monitoring Circuits
- Current and voltage sensing
- Industrial
- Mobile Phones
- Infotainment & cluster
- Simple Analog-to-Digital Converters (ADCs)
- Metering Systems
- Mobile Phones and Tablets
- Infotainment and Clusters