banner_page

ADCMP581BCPZ-RL7

Surface Mount Tape & Reel (TR) 44mA mA 0.18 ns μs Linear Comparators 70dB dB 30μA pA 34mA μA 10mV mV


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADCMP581BCPZ-RL7
  • Package: 16-WFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 833
  • Description: Surface Mount Tape & Reel (TR) 44mA mA 0.18 ns μs Linear Comparators 70dB dB 30μA pA 34mA μA 10mV mV (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 16-WFQFN Exposed Pad, CSP
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
ECCN Code EAR99
Type with Latch
Subcategory Comparator
Max Power Dissipation 240mW
Technology BIPOLAR
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADCMP581
Pin Count 16
Qualification Status Not Qualified
Output Type Complementary, ECL
Number of Elements 1
Power Supplies +-53.3V
Operating Supply Current 34mA
Nominal Supply Current 34mA
Power Dissipation 240mW
Output Current 44mA
Propagation Delay 180 ps
Quiescent Current 8mA
Response Time 0.18 ns
Common Mode Rejection Ratio 60 dB
Voltage - Supply, Single/Dual (±) ±4.5V~5.5V
Input Offset Voltage (Vos) 10mV
Neg Supply Voltage-Nom (Vsup) -5V
Voltage Gain 70dB
Power Supply Rejection Ratio (PSRR) 75dB
Supply Voltage Limit-Max 6V
Max Input Current 30μA
Dual Supply Voltage 5V
Input Bias Current 30μA
Neg Supply Voltage-Max (Vsup) -6V
Voltage - Input Offset (Max) 10mV @ ±5V
Current - Input Bias (Max) 30μA @ ±5V
Hysteresis 1mV
CMRR, PSRR (Typ) 60dB CMRR, 75dB PSRR
Current - Output (Typ) 44mA @ 5V
Propagation Delay (Max) 0.18ns
Height Seated (Max) 0.9mm
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADCMP581BCPZ-RL7 Overview


In order to facilitate transportation, it is packaged in 16-WFQFN Exposed Pad, CSP .There is a comparator of type Complementary, ECL output on this device.The part is shipped by Tape & Reel (TR) .As you can see, the comparator has16 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In terms of type, this is a typical with Latch comparator.The total number of elements is 1 .The board includes 16 pins.The recommended mounting method is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.The comparator has 16 pins.Try search ADCMP581 to get more pin-to-pin solutions for your special needs.The comparator displays a quiescent current of 8mA .Normally, the nominal supply current should be 34mA when using the device.There is sufficient power to run the device from +-53.3V power supplies.A maximum current of 30μA can be supplied to the device.In accordance with the voltage formula, the part's voltage gain is 70dB .

ADCMP581BCPZ-RL7 Features


Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 8mA
Voltage Gain: 70dB

ADCMP581BCPZ-RL7 Applications


There are a lot of Analog Devices Inc. ADCMP581BCPZ-RL7 linear comparators applications.

  • Set Top Boxes
  • General-Purpose, Low-Voltage Applications
  • High-Speed Sampling Circuits
  • Window Comparators
  • DC/DC and AC/DC power supplies
  • Motor drives
  • Wireless Base Stations
  • Notebooks and PDAs
  • Consumer Medical Electronics
  • Wide Range VCO; MOS Clock Timers

Write a review

Note: HTML is not translated!
    Bad           Good