ADCMP581BCPZ-WP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 200mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP581 |
| Pin Count | 16 |
| Output Type | Complementary, ECL |
| Number of Elements | 1 |
| Power Supplies | +-53.3V |
| Operating Supply Current | 34mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 240mW |
| Output Current | 44mA |
| Max Supply Current | 8mA |
| Propagation Delay | 180 ps |
| Quiescent Current | 8mA |
| Turn On Delay Time | 180 ps |
| Response Time | 0.18 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±4.5V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 48dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6V |
| Dual Supply Voltage | 5V |
| Input Bias Current | 30μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 10mV @ ±5V |
| Current - Input Bias (Max) | 30μA @ ±5V |
| Hysteresis | 1mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 44mA @ 5V |
| Propagation Delay (Max) | 0.18ns |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP581BCPZ-WP Overview
In order to facilitate transportation, it is packaged in 16-WFQFN Exposed Pad, CSP .A comparator with a Complementary, ECL output is used here.Electronic comparator is shipped by Tray .You can find 16 terminals of the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical with Latch comparator.There are a total of 1 elements in it.Electronic comparator includes 16 pins.A Surface Mount mounting type is recommended.The operating temperature should be set to -40°C~125°C to avoid mal-function.There are 16 pins on the comparator.In order to find a solution that meets your specific needs, search ADCMP581 for more pin-to-pin solutions.There is a quiescent current of 8mA in this comparator.Electronic comparator is recommended that the nominal supply current be 8mA in order to use the device normally.The compartator could be damaged if the current supply exceeds 8mA .The device can be run with +-53.3V power supplies.From the voltage formula, the voltage gain of the part is 48dB .
ADCMP581BCPZ-WP Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 8mA
Voltage Gain: 48dB
ADCMP581BCPZ-WP Applications
There are a lot of Analog Devices Inc. ADCMP581BCPZ-WP linear comparators applications.
- Limit Comparators
- Hand-Held Electronics
- Current and voltage sensing
- General Purpose Low Voltage Applications
- Lithium ion battery monitoring
- RC Timers
- Body Control Modules
- Zero-Crossing Detectors
- Threshold Detectors
- Wide Range VCO; MOS Clock Timers
