ADCMP582BCPZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 350mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP582 |
| Pin Count | 16 |
| Output Type | Complementary, PECL |
| Number of Elements | 1 |
| Power Supplies | +-53.3V |
| Operating Supply Current | 75mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 240mW |
| Output Current | 44mA |
| Max Supply Current | 8mA |
| Propagation Delay | 180 ps |
| Quiescent Current | 8mA |
| Response Time | 0.18 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±4.5V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 48dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 30μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 30μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 10mV @ ±5V |
| Current - Input Bias (Max) | 30μA @ ±5V |
| Hysteresis | 1mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 44mA @ 5V |
| Propagation Delay (Max) | 0.18ns |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP582BCPZ-R2 Overview
In order to facilitate transportation, it is packaged in 16-WFQFN Exposed Pad, CSP .Output type of this comparator is Complementary, PECL .The part will be shipped by Tape & Reel (TR) .16 terminals are found on the comparator.The electrical component here belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical with Latch comparator.This is a 1 element comparator.The pinout of the component starts from 16 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.16 pins are available on the comparator.Search ADCMP582 to find more pin-to-pin solutions.A quiescent current of 8mA is observed in this comparator.Electronic comparator is recommended that the nominal supply current of the device be 8mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 8mA .+-53.3V power supplies are enough to run the device.You can input a maximum current of 30μA into this device.In accordance with the voltage formula, the part's voltage gain is 48dB .
ADCMP582BCPZ-R2 Features
Complementary, PECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 8mA
Voltage Gain: 48dB
ADCMP582BCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP582BCPZ-R2 linear comparators applications.
- Factory automation & control
- Notebooks and PDAs
- Simple Analog-to-Digital Converters (ADCs)
- Wide Range VCO; MOS Clock Timers
- Multivibrators and High-Voltage Digital Logic Gates
- Wireless Base Stations
- General Purpose Low Voltage Applications
- Battery-Powered Electronics
- Window Comparators
- Security Detection Systems
