ADCMP582BCPZ-WP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 350mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP582 |
| Pin Count | 16 |
| Output Type | Complementary, PECL |
| Number of Elements | 1 |
| Power Supplies | +-53.3V |
| Operating Supply Current | 75mA |
| Nominal Supply Current | 8mA |
| Power Dissipation | 240mW |
| Output Current | 44mA |
| Max Supply Current | 8mA |
| Propagation Delay | 180 ps |
| Quiescent Current | 8mA |
| Response Time | 0.18 ns |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±4.5V~5.5V |
| Output Current per Channel | 44mA |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 48dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 30μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 30μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 10mV @ ±5V |
| Current - Input Bias (Max) | 30μA @ ±5V |
| Hysteresis | 1mV |
| CMRR, PSRR (Typ) | 60dB CMRR, 75dB PSRR |
| Current - Output (Typ) | 44mA @ 5V |
| Propagation Delay (Max) | 0.18ns |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP582BCPZ-WP Overview
Electronic comparator is packaged in 16-WFQFN Exposed Pad, CSP for convenient transportation.A comparator with an output type of Complementary, PECL is being used.Electronic comparator is shipped by Tray .16 terminals are found on the comparator.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as with Latch .Electronic comparator consists of 1 elements in total.Electronic comparator includes 16 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator has 16 pins.Try search ADCMP582 to get more pin-to-pin solutions for your special needs.A quiescent current of 8mA is observed in this comparator.Normal use of the device should require a nominal supply current of 8mA .An excess of current supply over 8mA could result in malfunction of the comparator.+-53.3V power supplies are enough to run the device.Electronic comparator is possible to input up to 30μA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 48dB .
ADCMP582BCPZ-WP Features
Complementary, PECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 8mA
Voltage Gain: 48dB
ADCMP582BCPZ-WP Applications
There are a lot of Analog Devices Inc. ADCMP582BCPZ-WP linear comparators applications.
- Infotainment and Clusters
- High-Speed Differential Line Receiver
- Battery management and protection
- Zero-Crossing Detectors
- Infotainment & cluster
- Mobile Phones
- Consumer Medical Electronics
- Wearable Devices
- Power management
- Power Supervision
