ADCMP600BRJZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 23mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP600 |
| Pin Count | 5 |
| Output Type | CMOS, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 6mW |
| Output Current | 15mA |
| Max Supply Current | 4mA |
| Propagation Delay | 5 ns |
| Quiescent Current | 4mA |
| Turn On Delay Time | 5 ns |
| Response Time | 5 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ADCMP600BRJZ-R2 Overview
In order to facilitate transportation, it is packaged in SC-74A, SOT-753 .There is a CMOS, TTL output type for this comparator.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 5 terminals of the comparator.The component belongs to the Comparator family of electrical components.When it comes to types, this comparator is a typical General Purpose .In total, it contains 1 elements.The device includes 5 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .This comparator has 5 pins.If you require more pin-to-pin solutions, search ADCMP600 for more options.A quiescent current of 4mA is displayed by this comparator.Electronic comparator is recommended that the nominal supply current of the device be 3.5mA .A supply current exceeding 4mA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum current of 5μA into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 85dB .Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
ADCMP600BRJZ-R2 Features
CMOS, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 4mA
Voltage Gain: 85dB
ADCMP600BRJZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP600BRJZ-R2 linear comparators applications.
- Portable Battery Monitoring
- General-Purpose Portable Devices
- DC/DC and AC/DC power supplies
- Battery-Powered Electronics
- Ultra-Low Power Systems
- Wide Range VCO; MOS Clock Timers
- Window Comparators
- Factory automation & control
- Zero-Crossing Detectors
- Security Detection Systems
