ADCMP601BKSZ-R2
| Parameters | |
|---|---|
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 6mW |
| Output Current | 50mA |
| Max Supply Current | 4mA |
| Propagation Delay | 5 ns |
| Quiescent Current | 4mA |
| Response Time | 5 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 23mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP601 |
| Pin Count | 6 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 3mA |
ADCMP601BKSZ-R2 Overview
The product is packaged in 6-TSSOP, SC-88, SOT-363 to facilitate transportation.Output type CMOS, TTL is used for this comparator.As a result, it is designed with Tape & Reel (TR) package.6 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.When it comes to types, this comparator is a typical with Latch .Electronic comparator has a total of 1 elements.The board includes 6 pins.Electronic comparator is recommended to mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .The comparator consists of 6 pins.You can search ADCMP601 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 4mA .Normal use of the device should require a nominal supply current of 3.5mA .If the current supply exceeds 4mA , the comparator could malfunction.There is sufficient power to run the device from 3/5V power supplies.You are allowed to input a maximum current of 5μA into the device.According to the voltage formula, the part has a voltage gain of 85dB .
ADCMP601BKSZ-R2 Features
CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 4mA
Voltage Gain: 85dB
ADCMP601BKSZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP601BKSZ-R2 linear comparators applications.
- High-Speed Differential Line Receiver
- Motor drives
- Battery-Powered Electronics
- Factory automation & control
- Limit Comparators
- Current and voltage sensing
- Automatic Test Equipment
- Building automation
- Mobile Phones and Tablets
- Automotive
