Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Number of Pins |
6 |
Supplier Device Package |
SC-70-6 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
with Latch |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Max Power Dissipation |
23mW |
Base Part Number |
ADCMP601 |
Output Type |
CMOS, TTL |
Number of Elements |
1 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.5V |
Operating Supply Current |
3mA |
Nominal Supply Current |
3.5mA |
Power Dissipation |
6mW |
Output Current |
50mA |
Max Supply Current |
4mA |
Propagation Delay |
5 ns |
Quiescent Current |
4mA |
Turn On Delay Time |
5 ns |
Response Time |
5 μs |
Common Mode Rejection Ratio |
50 dB |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
85dB |
Power Supply Rejection Ratio (PSRR) |
50dB |
Max Input Current |
5μA |
Input Bias Current |
5μA |
Current - Quiescent (Max) |
4mA |
Voltage - Input Offset (Max) |
5mV @ 2.5V |
Current - Input Bias (Max) |
5μA @ 2.5V |
Hysteresis |
100μV |
CMRR, PSRR (Typ) |
50dB CMRR, 50dB PSRR |
Current - Output (Typ) |
50mA |
Propagation Delay (Max) |
5ns |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADCMP601BKSZ-REEL7 Overview
The product is packaged in 6-TSSOP, SC-88, SOT-363 to facilitate transportation.Output type of this comparator is CMOS, TTL .The part is shipped by Tape & Reel (TR) .In terms of type, this is a typical with Latch comparator.In total, it contains 1 elements.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.6 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching ADCMP601 .The comparator presents a quiescent current of 4mA volts.Normal operation of the device requires 3.5mA supply current.An excess of current supply over 4mA could result in malfunction of the comparator.Electronic comparator is possible to input a maximum of 5μA current into the device.The voltage formula shows that the part has a voltage gain of 85dB .Temperature higher than 85°C is not recommended.Lower temperatures than -40°C are unsuitable for it.The maximal supply voltage of the comparator is 5.5V .This comparator can be supplied with a voltage as low as 2.5V .To maintain the output quality, 1 channels work together.
ADCMP601BKSZ-REEL7 Features
CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 4mA
Voltage Gain: 85dB
ADCMP601BKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADCMP601BKSZ-REEL7 linear comparators applications.
- System control and monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Battery-Powered Electronics
- Point of load regulators
- Wearable Devices
- Battery management and protection
- Self-diagnostics
- Automatic Test Equipment
- Building automation
- Metering Systems