ADCMP602BRMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 6mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP602 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 6mW |
| Output Current | 50mA |
| Propagation Delay | 5 ns |
| Quiescent Current | 2mA |
| Turn On Delay Time | 3 ns |
| Response Time | 5 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 2mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP602BRMZ-REEL Overview
In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the CMOS, TTL output type.The part is shipped by Tape & Reel (TR) .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.It's a typical with Latch comparator.In total, it contains 1 elements.The device is equipped with 8 pins.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .8 pins are present on the comparator.You may wish to search ADCMP602 for more solutions that address your specific needs.In this comparator, the quiescent current is 2mA .Normal operation of the device requires a nominal supply current of 3.5mA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.Input current to the device is limited to 5μA .According to the voltage formula, the part has a voltage gain of 85dB .
ADCMP602BRMZ-REEL Features
CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 2mA
Voltage Gain: 85dB
ADCMP602BRMZ-REEL Applications
There are a lot of Analog Devices Inc. ADCMP602BRMZ-REEL linear comparators applications.
- Wireless Base Stations
- Metering Systems
- Notebooks and PDAs
- Security Detection Systems
- Appliances
- General-Purpose Portable Devices
- Portable Battery Monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- RC Timers
- Industrial
