ADCMP602BRMZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 6mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADCMP602 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 6mW |
| Output Current | 50mA |
| Max Supply Current | 4mA |
| Propagation Delay | 5 ns |
| Quiescent Current | 2mA |
| Response Time | 5 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 2mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP602BRMZ-REEL7 Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.The comparator has an output type of CMOS, TTL .We ship the part through Tape & Reel (TR) .The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.Electronic comparator is possible to classify the chip as with Latch .A total of 1 elements can be found in it.Electronic comparator includes 8 pins.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions for your special requirements by searching ADCMP602 .A quiescent current of 2mA is observed in this comparator.Normally, the nominal supply current should be 3.5mA when using the device.Current supply exceeding 4mA could cause disfunction of the compartator.The device can be powered by 3/5V power supplies.Electronic comparator is possible to input up to 5μA current into the device.According to the voltage formula, the part has a voltage gain of 85dB .
ADCMP602BRMZ-REEL7 Features
CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 2mA
Voltage Gain: 85dB
ADCMP602BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADCMP602BRMZ-REEL7 linear comparators applications.
- Power management
- Battery-Powered Electronics
- Factory automation & control
- Industrial
- Motor drives
- Battery management and protection
- Alarm and Monitoring Circuits
- Infotainment & cluster
- Infotainment and Clusters
- Ultra-Low Power Systems
