ADCMP603BCPZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 6mW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP603 |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Complementary, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 3.6mA |
| Power Dissipation | 6mW |
| Output Current | 50mA |
| Propagation Delay | 5 ns |
| Quiescent Current | 1.8mA |
| Response Time | 5000 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 1.8mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP603BCPZ-R2 Overview
The product is packaged in 12-WFQFN Exposed Pad, CSP in order to facilitate transportation.A comparator with a CMOS, Complementary, Rail-to-Rail, TTL output is used here.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 12 terminals of the comparator.The component belongs to the Comparator family of electrical components.When it comes to types, this comparator is a typical with Latch .The total number of elements is 1 .As a result, it contains 12 pins.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .There are 12 pins on the comparator.You may wish to search ADCMP603 for more solutions that address your specific needs.A quiescent current of 1.8mA is displayed by this comparator.Electronic comparator is recommended that the nominal supply current be 3.6mA in order to use the device normally.The device can be powered by 3/5V power supplies.Input current to the device cannot exceed 5μA .A voltage gain of 85dB can be determined from the voltage formula for the part.
ADCMP603BCPZ-R2 Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.8mA
Voltage Gain: 85dB
ADCMP603BCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP603BCPZ-R2 linear comparators applications.
- Laptop Computers
- Battery-Powered Electronics
- Factory automation & control
- Simple Analog-to-Digital Converters (ADCs)
- Battery-Powered Electronics
- Mobile Phones
- Window Comparators, Multivibrators
- Zero-Crossing Detectors
- Self-diagnostics
- General-Purpose Portable Devices
