ADCMP603BCPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 6mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP603 |
| Pin Count | 12 |
| Output Type | CMOS, Complementary, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 3.6mA |
| Nominal Supply Current | 3.6mA |
| Power Dissipation | 6mW |
| Output Current | 50mA |
| Propagation Delay | 5 ns |
| Quiescent Current | 1.8mA |
| Turn On Delay Time | 3 ns |
| Response Time | 5000 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 1.8mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP603BCPZ-R7 Overview
The product is packaged in 12-WFQFN Exposed Pad, CSP for ease of transportation.Output type of this comparator is CMOS, Complementary, Rail-to-Rail, TTL .The part is shipped by Tape & Reel (TR) .As you can see, the comparator has12 terminals.Other Comparator like the device play a important role in the industry.This is a typical comparator of type with Latch .Electronic comparator consists of 1 elements in total.The board includes 12 pins.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.12 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching ADCMP603 .This comparator presents a quiescent current of 1.8mA .Electronic comparator is recommended that the nominal supply current be 3.6mA in order to use the device normally.The device can be operated with 3/5V power supplies.A maximum current of 5μA can be supplied to the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 85dB .
ADCMP603BCPZ-R7 Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.8mA
Voltage Gain: 85dB
ADCMP603BCPZ-R7 Applications
There are a lot of Analog Devices Inc. ADCMP603BCPZ-R7 linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- RC Timers
- Point of load regulators
- Zero-Crossing Detectors
- Motor drives
- Laptop Computers
- Notebooks and PDAs
- Mobile Communications
- Current and voltage sensing
- Handheld Instruments
