ADCMP603BCPZ-WP
| Parameters | |
|---|---|
| Current - Quiescent (Max) | 1.8mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 6mW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP603 |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Complementary, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 3.6mA |
| Nominal Supply Current | 3.6mA |
| Power Dissipation | 6mW |
| Output Current | 50mA |
| Propagation Delay | 5 ns |
| Quiescent Current | 1.8mA |
| Response Time | 5000 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
ADCMP603BCPZ-WP Overview
Electronic comparator is packaged in 12-WFQFN Exposed Pad, CSP for convenient transportation.Output type of this comparator is CMOS, Complementary, Rail-to-Rail, TTL .Ready for shipping in Tray package.The device is designed with 12 terminations.The electrical component in this case belongs to the Comparator families.When it comes to types, this comparator is a typical with Latch .In total, it contains 1 elements.As a result, it contains 12 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.This comparator has 12 pins.You can search ADCMP603 if you are looking for more pin-to-pin solutions.A quiescent current of 1.8mA is displayed by this comparator.Normal operation of the device requires a nominal supply current of 3.6mA .This device requires 3/5V power supplies to operate.You can input a maximum current of 5μA into this device.From the voltage formula, the voltage gain of the part is 85dB .
ADCMP603BCPZ-WP Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.8mA
Voltage Gain: 85dB
ADCMP603BCPZ-WP Applications
There are a lot of Analog Devices Inc. ADCMP603BCPZ-WP linear comparators applications.
- Hand-Held Electronics
- High-Speed Sampling Circuits
- Security Detection Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Battery management and protection
- Zero-Crossing Detectors
- Portable and Battery-Powered Systems
- Notebooks and PDAs
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
