ADCMP604BKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 42mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP604 |
| Pin Count | 6 |
| Output Type | Complementary, LVDS, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 17mA |
| Nominal Supply Current | 21mA |
| Power Dissipation | 42mW |
| Output Current | 50mA |
| Propagation Delay | 3 ns |
| Quiescent Current | 21mA |
| Response Time | 3 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 62dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Voltage - Input Offset (Max) | 5mV @ 3V |
| Current - Input Bias (Max) | 5μA @ 3V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP604BKSZ-REEL7 Overview
The product is packaged in 6-TSSOP, SC-88, SOT-363 for ease of transportation.Output type Complementary, LVDS, Rail-to-Rail is used for this comparator.The part will be shipped by Tape & Reel (TR) .The comparator has a total of 6 terminals.Electronic comparator is a component of the Comparator family.With a voltage of 2.5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.In total, it contains 1 elements.A total of 6 pins are included.A Surface Mount mounting type is recommended.The operating temperature should be set to -40°C~125°C to avoid mal-function.The comparator consists of 6 pins.You can search ADCMP604 if you are looking for more pin-to-pin solutions.A quiescent current of 21mA is observed in this comparator.Normal use of the device should require a nominal supply current of 21mA .A power supply of 3/5V is sufficient for the operation of the device.Electronic comparator is possible to input up to 5μA current into the device.From the voltage formula, the voltage gain of the part is 62dB .
ADCMP604BKSZ-REEL7 Features
Complementary, LVDS, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 21mA
Voltage Gain: 62dB
ADCMP604BKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADCMP604BKSZ-REEL7 linear comparators applications.
- RC Timers
- Lithium ion battery monitoring
- Self-diagnostics
- Window Comparators
- Simple Analog-to-Digital Converters (ADCs)
- Automotive
- Industrial
- Wearable Devices
- Consumer Medical Electronics
- Power management
