ADCMP604BKSZ-RL
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 42mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP604 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, LVDS, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 17mA |
| Nominal Supply Current | 17mA |
| Power Dissipation | 42mW |
| Output Current | 50mA |
| Propagation Delay | 3 ns |
| Quiescent Current | 21mA |
| Response Time | 3 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 21mA |
| Voltage - Input Offset (Max) | 5mV @ 3V |
| Current - Input Bias (Max) | 5μA @ 3V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP604BKSZ-RL Overview
The product is packaged in 6-TSSOP, SC-88, SOT-363 in order to facilitate transportation.The comparator has a Complementary, LVDS, Rail-to-Rail output.This package has been designed with Tape & Reel (TR) .Electronic comparator is possible to find the 6 terminals of the comparator.The electrical component in this case belongs to the Comparator families.With a 2.5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.In total, it contains 1 elements.The device includes 6 pins.Surface Mount universial mout for easy adapting.As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.6 pins are present on the comparator.You can find more pin-to-pin solutions by searching ADCMP604 .The comparator presents a quiescent current of 21mA volts.Normal operation of the device requires a nominal supply current of 17mA .There is sufficient power to run the device from 3/5V power supplies.Input current to the device cannot exceed 5μA .The voltage gain of the part is indicated by 70dB in the voltage formula.
ADCMP604BKSZ-RL Features
Complementary, LVDS, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 21mA
Voltage Gain: 70dB
ADCMP604BKSZ-RL Applications
There are a lot of Analog Devices Inc. ADCMP604BKSZ-RL linear comparators applications.
- Hand-Held Electronics
- Zero-Crossing Detectors
- Handheld Instruments
- Battery management and protection
- Battery-Powered Electronics
- Body Control Modules
- Power Supervision
- DC/DC and AC/DC power supplies
- Ultra-Low Power Systems
- Alarm and Monitoring Circuits
