ADCMP605BCPZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 42mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP605 |
| Pin Count | 12 |
| Output Type | Complementary, LVDS, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 17mA |
| Power Dissipation | 42mW |
| Output Current | 50mA |
| Max Supply Current | 3mA |
| Propagation Delay | 3 ns |
| Quiescent Current | 3mA |
| Turn On Delay Time | 1.5 ns |
| Response Time | 3 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 62dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Voltage - Input Offset (Max) | 5mV @ 3V |
| Current - Input Bias (Max) | 5μA @ 3V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP605BCPZ-R2 Overview
Electronic comparator is packaged in 12-WFQFN Exposed Pad, CSP for convenient transportation.A comparator with an output type of Complementary, LVDS, Rail-to-Rail is being used.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 12 terminals of the comparator.Other Comparator like the device play a important role in the industry.Electronic comparator is capable of performing numerous tasks when powered by 2.5V voltage.The type of the chip can be classified as with Latch .A total of 1 elements can be found in it.The pinout of the component starts from 12 pins it has.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.The comparator is equipped with 12 pins.You may wish to search ADCMP605 for more solutions that address your specific needs.As a result, this comparator displays a quiescent current of 3mA .Normal operation of the device requires a nominal supply current of 17mA .The compartator could be damaged if the current supply exceeds 3mA .In order to operate the device, 3/5V power supplies are sufficient.Electronic comparator is possible to input a maximum of 5μA current into the device.Based on the voltage formula, the voltage gain of the part is 62dB .
ADCMP605BCPZ-R2 Features
Complementary, LVDS, Rail-to-Rail output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 3mA
Voltage Gain: 62dB
ADCMP605BCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP605BCPZ-R2 linear comparators applications.
- Battery management and protection
- Power Supervision
- Notebooks and PDAs
- Consumer Medical Electronics
- Alarm and Monitoring Circuits
- System control and monitoring
- Analog front end
- Automotive
- Infotainment and Clusters
- Metering Systems
