ADCMP605BCPZ-WP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 42mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP605 |
| Pin Count | 12 |
| Output Type | Complementary, LVDS, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 17mA |
| Nominal Supply Current | 3mA |
| Power Dissipation | 42mW |
| Output Current | 50mA |
| Max Supply Current | 3mA |
| Propagation Delay | 3 ns |
| Quiescent Current | 3mA |
| Turn On Delay Time | 1.5 ns |
| Response Time | 3 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 62dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 5μA |
| Voltage - Input Offset (Max) | 5mV @ 3V |
| Current - Input Bias (Max) | 5μA @ 3V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP605BCPZ-WP Overview
The product is packaged in 12-WFQFN Exposed Pad, CSP to facilitate transportation.The comparator has a type Complementary, LVDS, Rail-to-Rail output.The part will be shipped by Tray .12 terminals are found on the comparator.The electrical component in this case belongs to the Comparator families.Supplied by 2.5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as with Latch .There are a total of 1 elements in it.Electronic comparator has 12 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator consists of 12 pins.You can find more pin-to-pin solutions by searching ADCMP605 .The comparator presents a quiescent current of 3mA volts.Electronic comparator is recommended that the nominal supply current of the device be 3mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 3mA .The device can be powered by 3/5V power supplies.The voltage formula shows that the part has a voltage gain of 62dB .
ADCMP605BCPZ-WP Features
Complementary, LVDS, Rail-to-Rail output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 3mA
Voltage Gain: 62dB
ADCMP605BCPZ-WP Applications
There are a lot of Analog Devices Inc. ADCMP605BCPZ-WP linear comparators applications.
- Metering Systems
- Wireless Base Stations
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Appliances
- Wide Range VCO; MOS Clock Timers
- Simple Analog-to-Digital Converters (ADCs)
- Self-diagnostics
- Notebooks and PDAs
