ADCMP606BKSZ-R2
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 150mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP606 |
| Pin Count | 6 |
| Output Type | CML, Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 26mA |
| Power Dissipation | 62mW |
| Output Current | 50mA |
| Propagation Delay | 2.1 ns |
| Quiescent Current | 26mA |
| Turn On Delay Time | 2.1 ns |
| Response Time | 2.1 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Current - Output (Typ) | 50mA |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP606BKSZ-R2 Overview
To facilitate transportation, it comes packaged in 6-TSSOP, SC-88, SOT-363 .Output type of this comparator is CML, Complementary, Rail-to-Rail .Electronic comparator is shipped by Tape & Reel (TR) .There are6 terminals on the comparator.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 2.5V voltage.It's a typical General Purpose comparator.There are a total of 1 elements in it.Electronic comparator has 6 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.6 pins are available on the comparator.You can search ADCMP606 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 26mA .Electronic comparator is recommended that the nominal supply current for the device be set to 26mA .Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.Electronic comparator is possible to input up to 5μA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 85dB .
ADCMP606BKSZ-R2 Features
CML, Complementary, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 26mA
Voltage Gain: 85dB
ADCMP606BKSZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP606BKSZ-R2 linear comparators applications.
- Automotive
- Appliances
- Limit Comparators
- Laptop Computers
- Infotainment and Clusters
- Factory automation & control
- High-Speed Differential Line Receiver
- Building automation
- Threshold Detectors
- Point of load regulators
