ADCMP606BKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 62mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP606 |
| Pin Count | 6 |
| Output Type | CML, Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 25mA |
| Nominal Supply Current | 25mA |
| Power Dissipation | 62mW |
| Output Current | 50mA |
| Propagation Delay | 2.1 ns |
| Quiescent Current | 26mA |
| Turn On Delay Time | 1 ns |
| Response Time | 2.1 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 26mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP606BKSZ-REEL7 Overview
A convenient packaging is provided in the form of 6-TSSOP, SC-88, SOT-363 .There is a comparator of type CML, Complementary, Rail-to-Rail output on this device.This device is designed in Tape & Reel (TR) case.The comparator has a total of 6 terminals.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 2.5V voltage.In terms of type, this is a typical General Purpose comparator.There are a total of 1 elements in it.Electronic comparator includes 6 pins.The recommended mounting method is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .6 pins are present on the comparator.In order to find a solution that meets your specific needs, search ADCMP606 for more pin-to-pin solutions.The comparator presents a quiescent current of 26mA volts.For normal use of the device, the nominal supply current should be 25mA .In order to run the device, there are only 3/5V power supplies required.There is a maximum current that can be input into the device of 5μA .Comparator electronics follows that the voltage gain of the part is 85dB .
ADCMP606BKSZ-REEL7 Features
CML, Complementary, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 26mA
Voltage Gain: 85dB
ADCMP606BKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADCMP606BKSZ-REEL7 linear comparators applications.
- Wireless Base Stations
- Motor drives
- Zero-Crossing Detectors
- Industrial
- System control and monitoring
- Wearable Devices
- Portable Battery Monitoring
- Ultra-Low Power Systems
- High-Speed Differential Line Receiver
- Power management
