ADCMP607BCPZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 62mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP607 |
| Pin Count | 12 |
| Qualification Status | Not Qualified |
| Output Type | CML, Complementary, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 25mA |
| Power Dissipation | 62mW |
| Output Current | 50mA |
| Propagation Delay | 2.1 ns |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 1 ns |
| Response Time | 2.1 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Current - Quiescent (Max) | 1.5mA |
| Voltage - Input Offset (Max) | 5mV @ 2.5V |
| Current - Input Bias (Max) | 5μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP607BCPZ-R2 Overview
For convenience, it is packaged in 12-WFQFN Exposed Pad, CSP .There is a comparator of type CML, Complementary, Rail-to-Rail output on this device.The chip is packaged with Tape & Reel (TR) .You can find 12 terminals of the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 2.5V voltage.When it comes to types, this comparator is a typical with Latch .In total, it contains 1 elements.The device is equipped with 12 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.This comparator has 12 pins.You can find more pin-to-pin solutions for your special requirements by searching ADCMP607 .A quiescent current of 1.5mA is observed in this comparator.Electronic comparator is recommended that the nominal supply current of the device be 25mA .In order to operate the device, 3/5V power supplies are sufficient.A maximum current of 5μA can be supplied to the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 85dB .
ADCMP607BCPZ-R2 Features
CML, Complementary, Rail-to-Rail output capability
with Latch IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.5mA
Voltage Gain: 85dB
ADCMP607BCPZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP607BCPZ-R2 linear comparators applications.
- System control and monitoring
- Metering Systems
- High-Speed Differential Line Receiver
- Battery-Powered Electronics
- Mobile Phones
- Window Comparators
- Appliances
- Infotainment and Clusters
- Wearable Devices
- General Purpose Low Voltage Applications
