ADCMP608BKSZ-R2
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP608 |
| Pin Count | 6 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.5V |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1mW |
| Output Current | 50mA |
| Max Supply Current | 1.3mA |
| Propagation Delay | 60 ns |
| Quiescent Current | 1.3mA |
| Turn On Delay Time | 60 ns |
| Response Time | 60 ns |
| Common Mode Rejection Ratio | 45 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 3mV @ 2.5V |
| Current - Input Bias (Max) | 0.4μA @ 2.5V |
| CMRR, PSRR (Typ) | 45dB CMRR, 50dB PSRR |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 7.15mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
ADCMP608BKSZ-R2 Overview
In order to make transportation easier, it is packaged in 6-TSSOP, SC-88, SOT-363 .There is a CMOS, Rail-to-Rail, TTL output type for this comparator.This package has been designed with Tape & Reel (TR) .You can find 6 terminals of the comparator.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 2.5V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 1 elements.The device includes 6 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .The comparator has a pin count of 6 .Alternatively, you may search for ADCMP608 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 1.3mA volts.Normal operation of the device requires 500μA supply current.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1.3mA .The device can be operated with 2.5V power supplies.A maximum current of 400nA can be supplied to the device.The voltage gain of the part is indicated by 80dB in the voltage formula.
ADCMP608BKSZ-R2 Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.3mA
Voltage Gain: 80dB
ADCMP608BKSZ-R2 Applications
There are a lot of Analog Devices Inc. ADCMP608BKSZ-R2 linear comparators applications.
- Portable Battery Monitoring
- High-Speed Sampling Circuits
- Pulse, Squarewave, and Time Delay Generators
- Wearable Devices
- Battery-Powered Electronics
- Hand-Held Electronics
- Factory automation & control
- Current and voltage sensing
- Infotainment and Clusters
- Self-diagnostics
