ADCMP608BKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 7.15mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP608 |
| Pin Count | 6 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1mW |
| Output Current | 50mA |
| Max Supply Current | 1.3mA |
| Propagation Delay | 60 ns |
| Quiescent Current | 1.3mA |
| Turn On Delay Time | 60 ns |
| Response Time | 60 ns |
| Common Mode Rejection Ratio | 45 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Voltage - Input Offset (Max) | 3mV @ 2.5V |
| Current - Input Bias (Max) | 0.4μA @ 2.5V |
| CMRR, PSRR (Typ) | 45dB CMRR, 50dB PSRR |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP608BKSZ-REEL7 Overview
A convenient packaging is provided in the form of 6-TSSOP, SC-88, SOT-363 .A comparator with an output type of CMOS, Rail-to-Rail, TTL is being used.The chip is packaged with Tape & Reel (TR) .The device is designed with 6 terminations.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 3.3V voltage.When it comes to types, this comparator is a typical General Purpose .There are a total of 1 elements in it.The device is equipped with 6 pins.A Surface Mount mounting type is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .There are 6 pins on the comparator.Alternatively, you may search for ADCMP608 to find more pin-to-pin solutions for your specific needs.The comparator presents a quiescent current of 1.3mA volts.The nominal supply current of the device should be 500μA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1.3mA .The device can be operated with 3.3V power supplies.There is a maximum current that can be input into the device of 400nA .In accordance with the voltage formula, the part's voltage gain is 80dB .
ADCMP608BKSZ-REEL7 Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.3mA
Voltage Gain: 80dB
ADCMP608BKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADCMP608BKSZ-REEL7 linear comparators applications.
- Zero-Crossing Detectors
- Consumer Medical Electronics
- Laptop Computers
- Multivibrators and High-Voltage Digital Logic Gates
- High-Speed Sampling Circuits
- Wireless Base Stations
- Infotainment and Clusters
- Industrial
- Ultra-Low Power Systems
- Portable Battery Monitoring
