ADCMP608BKSZ-RL
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP608 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1mW |
| Output Current | 50mA |
| Propagation Delay | 60 ns |
| Quiescent Current | 1.3mA |
| Response Time | 60 ns |
| Common Mode Rejection Ratio | 45 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 90dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Current - Quiescent (Max) | 1.3mA |
| Voltage - Input Offset (Max) | 3mV @ 2.5V |
| Current - Input Bias (Max) | 0.4μA @ 2.5V |
| CMRR, PSRR (Typ) | 45dB CMRR, 50dB PSRR |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP608BKSZ-RL Overview
For convenience, it is packaged in 6-TSSOP, SC-88, SOT-363 .A comparator with an output type of CMOS, Rail-to-Rail, TTL is being used.The part will be shipped by Tape & Reel (TR) .You can find 6 terminals of the comparator.The electrical component here belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 2.5V voltage.In terms of type, this is a typical General Purpose comparator.This element consists of 1 elements in total.As a result, it contains 6 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.Electronic comparator has 6 pins.If you require more pin-to-pin solutions, search ADCMP608 for more options.A quiescent current of 1.3mA is displayed by this comparator.Normal operation of the device requires a nominal supply current of 500μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 2.5V power supplies.You can input a maximum current of 400nA into this device.According to the voltage formula, the part has a voltage gain of 90dB .
ADCMP608BKSZ-RL Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.3mA
Voltage Gain: 90dB
ADCMP608BKSZ-RL Applications
There are a lot of Analog Devices Inc. ADCMP608BKSZ-RL linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Battery management and protection
- Lithium ion battery monitoring
- Self-diagnostics
- Infotainment & cluster
- Body Control Modules
- General-Purpose, Low-Voltage Applications
- Window Comparators
- Infotainment and Clusters
- Zero-Crossing Detectors
