ADCMP609BRMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP609 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1mW |
| Output Current | 50mA |
| Propagation Delay | 60 ns |
| Quiescent Current | 1.1mA |
| Turn On Delay Time | 30 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Current - Quiescent (Max) | 1.1mA |
| Voltage - Input Offset (Max) | 3mV @ 2.5V |
| Current - Input Bias (Max) | 0.4μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP609BRMZ-REEL Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with a CMOS, Rail-to-Rail, TTL output is used here.The part will be shipped by Tape & Reel (TR) .As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator family.With a 2.5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical General Purpose comparator.The total number of elements is 1 .There are 8 pins on this board.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .Electronic comparator has 8 pins.Search ADCMP609 to find more pin-to-pin solutions.The comparator displays a quiescent current of 1.1mA .Electronic comparator is recommended that the nominal supply current of the device be 500μA .In order to operate the device, 2.5V power supplies are sufficient.The maximal current your can input into the device is 400nA .In accordance with the voltage formula, the part's voltage gain is 80dB .
ADCMP609BRMZ-REEL Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.1mA
Voltage Gain: 80dB
ADCMP609BRMZ-REEL Applications
There are a lot of Analog Devices Inc. ADCMP609BRMZ-REEL linear comparators applications.
- Industrial
- General-Purpose, Low-Voltage Applications
- Threshold Detectors
- Window Comparators, Multivibrators
- Ultra-Low Power Systems
- Portable Battery Monitoring
- Body Control Modules
- Mobile Phones and Tablets
- Battery management and protection
- Notebooks and PDAs
