ADCMP609BRMZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 7mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADCMP609 |
| Pin Count | 8 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2.5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 1mW |
| Output Current | 50mA |
| Max Supply Current | 800μA |
| Propagation Delay | 60 ns |
| Quiescent Current | 1.1mA |
| Turn On Delay Time | 60 ns |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400nA |
| Input Bias Current | 400nA |
| Current - Quiescent (Max) | 1.1mA |
| Voltage - Input Offset (Max) | 3mV @ 2.5V |
| Current - Input Bias (Max) | 0.4μA @ 2.5V |
| Hysteresis | 100μV |
| CMRR, PSRR (Typ) | 50dB CMRR, 50dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADCMP609BRMZ-REEL7 Overview
In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a CMOS, Rail-to-Rail, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.In the presence of a 2.5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator consists of 1 elements in total.The device is equipped with 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching ADCMP609 .There is a quiescent current of 1.1mA in this comparator.Normal use of the device should require a nominal supply current of 500μA .If the current supply exceeds 800μA , the comparator could malfunction.In order to run the device, there are only 2.5V power supplies required.There is a maximum current that can be input into the device of 400nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 80dB .
ADCMP609BRMZ-REEL7 Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1.1mA
Voltage Gain: 80dB
ADCMP609BRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADCMP609BRMZ-REEL7 linear comparators applications.
- Hand-Held Electronics
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- High-Speed Differential Line Receiver
- General-Purpose, Low-Voltage Applications
- System control and monitoring
- Infotainment & cluster
- Factory automation & control
- Ultra-Low Power Systems
- Simple Analog-to-Digital Converters (ADCs)
