ADD5211ACPZ-R7
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad, CSP |
| Number of Pins | 24 |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Backlight, Lighting |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 200kHz~1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADD5211 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Max Output Current | 200mA |
| Number of Channels | 1 |
| Max Supply Voltage | 40V |
| Output Current | 200mA |
| Max Supply Current | 1μA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 40V |
| Output Current per Channel | 200mA |
| Internal Switch(s) | No |
| Dimming | PWM |
| Max Input Voltage (DC) | 40V |
| Min Input Voltage (DC) | 4.5V |
| Number of Segments | 20 |
| Switching Frequency | 1.2MHz |
| Nominal Input Voltage (DC) | 12V |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADD5211ACPZ-R7 Overview
Space is saved using its 24-WFQFN Exposed Pad, CSP package. A LED driver using this design has 4 outputs.We are using Surface Mount as the mounting method.As a DC DC Controller, it has high efficiency and reliability.It is possible for the led driver ic to function normally at -25°C~85°C TA.Backlight, Lighting benefits significantly from the program.The system operates at a frequency of 200kHz~1.2MHz.It operates with 24 terminations.With a base of 24, this LED light driver is configured.20 segments exist.It's mounted in Surface Mount.It is under the base part number ADD5211 that you can find this LED driver.40V is an acceptable voltage.24 pins are used on the device.At its minimal input voltage, it operates at 4.5V.When the maximum supply current is allowed, it reaches 40V.As long as the maximum supply current is less than 1μA, this device is capable of providing high efficiency.200mA is the maximum current the load can handle.The electronic component can fully perform its functions if the switching frequency is maintained at 1.2MHz.At maximum output current 200mA, it will deliver all the benefits of a LED driver.It is currently possible to transmit over 1 channels.
ADD5211ACPZ-R7 Features
Available in the 24-WFQFN Exposed Pad, CSP package
Operating temperature of -25°C~85°C TA
Frequency of 200kHz~1.2MHz
Supply voltage of 12V
Switching frequency of 1.2MHz
ADD5211ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADD5211ACPZ-R7 LED Driver ICs applications.
- Stage Lighting and Signage
- Museum lighting
- High-end retail lighting
- Amusement Machines
- Other Electronic Devices
- Flicker-free LED Lighting using R1580N
- Auxiliary lights for on-vehicle cameras
- Down lighting
- Street lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
