ADD8710ARUZ
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 28 |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Buffer Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 28 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 10 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 700μA |
| Current - Output | 10mA |
| Quiescent Current | 910μA |
| Slew Rate | 8 V/μs |
| Amplifier Type | BUFFER |
| Current - Input Bias | 500nA |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 4mV |
| Average Bias Current-Max (IIB) | 1.5μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Settling Time | 1.1 μs |
| -3db Bandwidth | 5MHz |
| Capacitance - Input | 1pF |
| Number of Amplifiers | 11 |
| Height | 1.05mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ADD8710ARUZ Overview
In order to protect the op amps, a TSSOP case is used. An op amp ic of the BUFFER type. In total, there are 28 pins on this op amp ic. This linear amplifier should be powered by an 16V battery. In more specific terms, this linear amplifier can be categoriBuffer Amplifiered as a Buffer Amplifier-type device. The buffer op amp includes 28 pins. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. Using an 10mA supply current, this operational amplifier ics can be operated. Op amp ic has 10 channels. It should not lower than -40°C to operate buffer amplifier. It is recommended that op amp be used at temperatures below 85°C. I would like to point out that this electrical component is capable of working from a voltage below 18V as far as the power supply is concerned. As a rule of thumb, the supply voltage of the op amp should not be lower than 4.5V. Buffer amplifier has a quiescent current of 910μA. The buffer amplifier consists of 11 amplifiers.
ADD8710ARUZ Features
28 Pins
supply voltage of 16V
ADD8710ARUZ Applications
There are a lot of Analog Devices, Inc. ADD8710ARUZ Instrumentational OP Amps applications.
- Signal operation
- Addition operation circuits
- Voltage regulation circuit
- E-book readers
- Multiplication circuits
- Gaming industry
- Weighing systems
- Video amplifiers
- Medical instruments
- RF cable systems
