ADE7166ASTZF16
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 2.4V~3.7V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADE7166 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.7V |
| Power Supplies | 3.3V |
| Interface | UART |
| Memory Size | 16kB |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 4mA |
| RAM Size | 512B |
| Memory Type | FLASH |
| Data Bus Width | 8b |
| Number of Timers/Counters | 2 |
| Resolution | 3 B |
| Core Architecture | 8052 |
| Max Frequency | 1Hz |
| Conversion Rate | 25.6 ksps |
| Input Impedance | 770kOhm |
| Meter Type | Single Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.4V 0.8V |
| Voltage - I/O High | 1.3V 2V 2.4V |
| Height | 1.45mm |
| Length | 10.2mm |
| Width | 10.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADE7166ASTZF16 Overview
It was packaged in Tray. This package has the 64-LQFP extension. Using it as a Single Phase meter is possible. Currently available in Surface Mount. The operational temperature at -40°C~85°C has been increased. 2.4V~3.7V power supply is used to power it. Find more similar parts by searching ADE7166. The low-level I/O ports on this PMIC have a voltage of 0.4V 0.8V. There is a voltage value of 1.3V 2V 2.4V on this device as it is designed for high-level I/Os. There are 64 terminations on the part. PMIC analog ANALOG CIRCUIT IC with high power. The part requires a normal voltage of 3.3V. It is recommended that the maximum voltage that can be applied to the device should be kept below 3.7V. Joined 64 pins make up the frame. Logic gate applications using a 64 solution. With its Surface Mount design, it can be easily installed and dismounted and can be used for many projects. A Other Analog ICs for specialized needs is what this is. If you wish to keep the PMIC working normally, it is recommended that you set the supply current to 4mA instead of A. As a general rule, the device requires 3.3V power supplies to function. As far as frequency is concerned, this device can operate up to 1Hz. This PMIC incorporates memory sized 16kB. Memory FLASH is utilised by the PMIC.
ADE7166ASTZF16 Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 1Hz.
16kB adequate size for target applications.
FLASH memory.
ADE7166ASTZF16 Applications
There are a lot of Analog Devices Inc. ADE7166ASTZF16 Energy Metering ICs applications.
- Subsystem Power Measurement
- Power monitoring instruments
- Intelligent Power Distribution Units
- Industrial Lighting Power Monitoring
- Telecommunications and data communications equipment
- Real-Time Measurement of Input Power for AC/DC Supplies
- Telecom Infrastructure
- Power Monitoring for Home Automation
- PCs/servers
- Power monitoring/power budgeting
