banner_page

ADF4001BCPZ-RL7

3V Clock Generator (RF) 200MHz ADF4001 Clock Generators 20 Pins 20-WFQFN Exposed Pad, CSP 20 Terminals Surface Mount 2.7V~5.5V Tape & Reel (TR)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADF4001BCPZ-RL7
  • Package: 20-WFQFN Exposed Pad, CSP
  • Datasheet: PDF
  • Stock: 407
  • Description: 3V Clock Generator (RF) 200MHz ADF4001 Clock Generators 20 Pins 20-WFQFN Exposed Pad, CSP 20 Terminals Surface Mount 2.7V~5.5V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Operating Supply Voltage 5V
Number of Circuits 1
Operating Supply Current 4.5mA
Nominal Supply Current 4.5mA
Frequency (Max) 200MHz
Data Rate 200 kbps
Input CMOS, TTL
Ratio - Input:Output 2:1
Primary Clock/Crystal Frequency-Nom 100MHz
PLL Yes
Differential - Input:Output Yes/No
Height Seated (Max) 0.9mm
Length 4mm
Width 4mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-WFQFN Exposed Pad, CSP
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
Type Clock Generator (RF)
Technology BICMOS
Voltage - Supply 2.7V~5.5V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Supply Voltage 3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADF4001
Output Clock
Pin Count 20
Number of Outputs 2
Qualification Status Not Qualified

ADF4001BCPZ-RL7 Overview


A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. The 20-WFQFN Exposed Pad, CSP package embeds this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As you can see, it consists of 20 terminations. This time clock generator should be voltaged at 3V. CMOS, TTL is designed for clock generator's input. 1 circuits are implemented to access the electronic component's full performance. There is a maximum frequency of 200MHz Max with this clock-based frequency generator. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There should be 2.7V~5.5V provided with this RF synthesizer. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. The RF synthesizer is compatible with Clock logic levels. It is possible to classify this electronic component as a Clock Generator (RF). Microprocessors are specifically designed to use this clock-generating IC, which has a 20-bit output. The related electronic parts of part number ADF4001 are listed below. PF synthesizers is equipped with 20 pins. There is a maximum supply voltage of 5V that clock generator can handle. Clock PLL is facilitated with 2 signal outputs to magnify output frequency as high as possible. For the time clock generator to operate properly, 4.5mA of supply current are required.

ADF4001BCPZ-RL7 Features


Available in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V

ADF4001BCPZ-RL7 Applications


There are a lot of Analog Devices Inc. ADF4001BCPZ-RL7 Clock Generators applications.

  • Myriad digital applications
  • Threshold extension
  • Signal generator
  • Laptops
  • Skew suppression
  • Microwave backhaul IF
  • Radio receivers
  • Multiplexing communication
  • Main oscillator in receiver
  • Digital HDTV systems

Write a review

Note: HTML is not translated!
    Bad           Good