banner_page

ADF4001BRU

3V Clock Generator (RF) 200MHz ADF4001 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.7V~5.5V Tube


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADF4001BRU
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 518
  • Description: 3V Clock Generator (RF) 200MHz ADF4001 Clock Generators 16 Pins 16-TSSOP (0.173, 4.40mm Width) 16 Terminals Surface Mount 2.7V~5.5V Tube (Kg)

Details

Tags

Parameters
Contact Plating Lead, Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Clock Generator (RF)
Technology BICMOS
Voltage - Supply 2.7V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 3V
Base Part Number ADF4001
Output Clock
Pin Count 16
Number of Outputs 2
Operating Supply Voltage 5V
Number of Circuits 1
Operating Supply Current 4.5mA
Nominal Supply Current 4.5mA
Max Supply Current 5.5mA
Frequency (Max) 200MHz
Data Rate 200 kbps
Input CMOS, TTL
Ratio - Input:Output 2:1
Primary Clock/Crystal Frequency-Nom 100MHz
PLL Yes
Differential - Input:Output Yes/No
Height 1.05mm
Length 5mm
Width 4.4mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

ADF4001BRU Overview


Tube-method packaging is used for clock ICs. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. 16 terminations can be found in frequency generators. Clock generator ics require a voltage of 3V. In this clock generator, CMOS, TTL is used as the input to the clock. 1 circuits are implemented to access the electronic component's full performance. An up to 200MHz frequency is provided by this clock-based RF synthesizer. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL works with 2.7V~5.5V supply voltage provided. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. The RF synthesizer is compatible with Clock logic levels. This is an electronic part that can be classified as a Clock Generator (RF) in this case. It is a 16-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number ADF4001. There are 16 pins that are available on the clock PLL. There is a maximum supply voltage of 5V that this analog clock generator can handle. 2 signal outputs maximi2e the output frequency. This time clock generator requires a supply current of 4.5mA in order to operate properly. This RF synthesizer operation requires a maximum current of 5.5mA.

ADF4001BRU Features


Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V

ADF4001BRU Applications


There are a lot of Analog Devices Inc. ADF4001BRU Clock Generators applications.

  • Signal modulation and demodulation
  • Wireless handsets
  • Clock synchronization
  • Motor speed controls
  • Pagers
  • Set-top boxes
  • Bluetooth transmitters
  • Sampling clocks for ADC and DAC
  • Radiotelephones
  • Jitter reduction

Write a review

Note: HTML is not translated!
    Bad           Good